How To Put A Fishing Line On A Reel

First, what is the fishing reel? It’s a cylindrical instrument that gets attached to a fishing rod. It is an essential part of any fishing gear. The fishing reel is mostly used for winding lines. There are numerous fishing reels in the market, such as spinning reels, baitcasting reels, and closed face reels. Closed face reels are the easiest to handle, and thus putting the line is stress-free. Therefore, they are perfect for beginners who want to attempt their hand at fishing.

You need to learn the trick of putting a fishing line on a reel if you want to be good at angling.  Failure to do that, you will not be the best fisher whatsoever even if you have the best fishing rod.  The vital constituent of a fishing assembly is the fishing reel.

It’s, therefore, the first thing to know.  Doing so is quite an easy process as you just follow the steps required carefully. What you need to know is that there are three-reel types that are spinning, baitcasting, and spin casting reel.  Each one of the types varies on how to place the fishing line.

Steps to Follow in Placing Fishing Line On Each Type Of Reel

Steps to Follow in Placing Fishing Line On Each Type Of Reel

In spinning and baitcasting you follow these simple steps;

1. Open the bail by lifting the wire arm

Bait casters do not have bail, and therefore, this step won’t apply. On spinning reels, the little wire arm hanging off the reel is the bail.

2. Run the new fishing line via the line guides

What are the line guides? They are the small loops hanging off the beneath side of the rod.  Begin at the far-off end of the rod by pushing the line via the loops and toward the reel. In the bait caster rod, you should check for a tiny hole in the reel. Also, you need to run the line via this guide to reach inside the bail.

3. Knot the line on the reel spool.

Shawl the end of the new line over the spool. Tie the line together in an arbor knot after bringing the end of the line back toward you. You need to know that an arbor knot is completed by first attempting an overhand knot.         

4. Close the bail by lowering the wire arm

Ensure you pull the wire arm as far it will reach. In doing so, you will have to lock the line in place.  The tracks come undone sometimes, and for a scenario like that, you lift the bail and redo the knot.

5. Cranks the rod’s handle to check out which way the bail rotates

 You need to observe keenly the direction the bail rotates, you know why? Because the lines require to be loaded in the same direction. After this, Drop the spool of the fishing line on the floor. Ensure the label face upwards. Do proper position adjustment of the rod for the line to be loaded correctly.

For instance, if your bail rotates clockwise, then position to the left of the spool for the line to shawl clockwise round it.  For the bait caster rods, it’s a little bit different as you require to stick a pencil via the spool and let someone else hold it.  As an alternative option for this, you can buy a reel spooler.

6.Lightly grip the line between your index finger and your thumb

Use your hand as you grip the rod in your other hand. In doing that, you require to uphold constant pressure.  To know if you are holding it properly, then the line should not tangle going into the reel and feel taut.

7.Turn the rod’s handle 15 TO 20 times

Stay on holding the line as you crank the handle. Make sure you observe the line keenly, so it does not load with tangles or knots.  You need to unspool the line to fix the knots or tangles.

8. Drop a line to test it for tangles

Let go of the fishing line and observe it drop to the ground. You will directly notice any loops or twists in the line.  To reimburse, flip the spool of ne fishing line for a label to face the ground. Ensure the line goes on to load in the same direction the bail rotates.

9. Fill the rod’s spool till it’s almost full

Pinch the line once more between your index finger and thumb to stay straight and then rotate the rod’s crank. Load the line till the reel is nearly full. The line ought to be 0.32 cm underneath the spool’s rim. Censored the line to separate it from the new spool to wind up.

10.Secure the line to the reel with a rubber band

Put a rubber band around the line on the reel to grip it in place. In case your reel has a tab on the side, packaging the line round it will as well grasp everything in place.

As a beginner, you might need to know how to put a fishing line on a closed face reel.  Follow the steps mentioned below in-depth for a better understanding.

How to Put a Fishing Line on a Closed Face Reel | 9 Simple Steps to Follow

How to Put a Fishing Line on a Closed Face Reel

Step 1:Classify the Line Capacity of the Reel

Anytime look at the line capacity of the reel stated on the top. Ensure you are putting a suitable line on the reel. If in any way, you put the unsuitable line on the reel, it would make the line limit the casting distance and not manageable.

Step 2: Lay Your Rod Flat and Open the Cover The Reel.

Ensure you unscrew the lid of the closed face reel and take it off.  You should know that not all reels need unscrewing; some have a pin and a notch that gets separated. Also, others have push-button that open up the cover automatically upon pressing.

Step3:Remove the Old Line from the Reel If Any

But as well you can choose to keep some part of the old lines so that you can ascribe the new line for a long cast. This means the old line can act as a backup.

Step 4: Tie the New Line to the Spool

Run the line via the eyelets or hole in the cover. The string ought to come from the end of the rod.  Ensure you tie up the new lines to the spool of the reel. Make sure to run the line from the tip to the handle.  Take the assistance of the rod guide if required. If you had preferred to use the old lines as a backup, then you are supposed to tie both the strings back together with a nail knot or two clinch knots.

Step 5: Cover the Reel Back

Grip the line tight while placing the cover back once more.  As you are doing so, ensure the line does not get pinched whatsoever by the cover of the reel. After you are done putting the cover back on, tightly pull the line.

Step 6: Reel the New Line on the Reel

First, ensure the spool is well laid on the ground. This is done to make sure the lines emanate off the spool properly as it goes on your reel. The purpose of this process is to ensure there is no twisting of the line. Prudently grasp the line tight using one hand and begin reeling the procedure of the new line on the reel. Ensure you are maintaining maximum tension on the line for the reel to be very tight. If the line is not tight, then casting problems may arise. Always reel the line at a gentle and stable pace.

Step 7: Fill Spool to 1/8 Inch of the Lid

Make sure not to place an excessive line on the reel. If you want the reel not to get overloaded with the line, then you should open the reel lid every 15 to 20 seconds. You should always keep in mind that reel grasps less line when compared to other types of reels. As you replace the old line with a new string on be careful not to pinch it. 

Step 8: Run the Line and Tie Ab Lure Using Line Guide

Through a proper line guide, there is no doubt you can tie the lure of your choice.  You are now fully prepared for a fishing adventure. But ensure to grasp the reel while casting. Gripping the reel makes you pinch the line between your fingers. As well, this entire process assists in keeping the string tight when reeling using an alight lure.

Step 9: Remove Twists and Tangles from the Line

Make sure there are no tangles and twists on the line while you do the reeling process. For the reel to back gently, lay the string on flat ground. Ensure there are no problems at the end of the line.


As you all know, the fishing line usually wears out, and therefore, it needs a new one. So, you should know how to put a new fishing line on the spinning reels. To do so, you follow the steps mentioned above.

Placing a fishing line correctly on the reel ensures a hassle-free and well-organized angling experience. Therefore, you should follow the steps mentioned above to know how to put a fishing line in a closed face reel correctly.

Leave a Comment