Is your outdoor faucet leaking? The major cause of the leakage might be wear and tear. There are several other reasons that cause outdoor faucets to leak from the handle. Outdoor faucets are part of the exterior of your house and have a lot to do with the appearance of your home. If you have recently noticed that your outdoor faucet isn’t working as it should, you’re not alone. Such problems happen all the time with outdoor faucets.
For you to fix your outdoor faucet, it is important to identify what is wrong before starting any work on it. When an outdoor faucet is leaking, the problem could be emanating from different things. If you identify the problem correctly, you’ll know what to do next. Therefore, it will be best if you first identify what might be wrong with your outdoor faucet.
Why Is The Outdoor Faucet Leaking From The Handle?
Identifying why your outdoor faucet is leaking from the handle is the first step towards remedying the situation. As stated earlier, several causes contribute to the leakage. These causes include corrosion, debris, wear and tear, and many more. Knowing what exactly hails your faucet helps in fixing it efficiently.
If you are at crossroads as to why your outdoor faucet is leaking from its handle, worry no more. This article will walk you through the causes of your problem and guide you on the best possible ways to solve the situation. Keep reading!
The 3 Main Causes Of Leakage In Outdoor Faucets
Corrosion happens when water touches metal for too long and starts to eat away at it. A few solutions for this problem include using vinegar and baking soda to clean the area, replacing the washers, or changing the stopper.
If the above solutions don’t work, maybe the corrosion has eaten away the outdoor faucet, and you need to buy a new one. However, that might make you dig a little bit into your pockets.
Another common problem is debris in the valve. Debris can be caught in the valve, making it difficult for water to pass through it. The solution for this problem is removing debris from the valve using a wire hanger and installing new washers. You can consult a plumber to determine the budget involved.
3. Hole In The Piping System
If a hole exists in your piping system, there will not be enough pressure for water to come out of your faucet at the recommended speed. You can solve this problem by repairing or replacing your piping system.
The major step you should take is to test your water pressure when the faucet is on and off. Suppose the water pressure changes when the faucet is turned on or off, then you likely have a hole in the pipe.
Fixing The Outdoor Faucet Step-By-Step
Fixing an outdoor faucet can be tricky and should not be taken lightly. To avoid any problems or potential damage, please follow these steps when fixing an outdoor faucet:
1. Turn Off The Water Supply
The initial stage you need to undertake is to turn off the water supply to your house and make sure all other fixtures are turned off as well. Turning it off will help you ensure that the water pressure will not come at once when you check out the faulty faucet handle. Also, it helps you measure the intensity of the leak.
2. Clear Debris From The Valve
If the leaking faucet is due to debris that has clogged it, you need to remove the fixture from the pipe and spray it with a garden hose to clear debris from the valve and threads. This way, the present dirt is removed, and you will get your faucet working properly again.
3. Replace The Faucet Or The Worn Out Parts
Suppose you see the leak has been caused by the outdoor faucet being worn out or owing to wear and tear; you can choose what to do with that. If you want to call someone to fix the old one, you can. If you want to replace the outdoor faucet with a new faucet, you can also do that.
Replace any washers or parts that may have worn out. Please always consult when you are at this stage.
If the leaky faucet results from the loose bolt, you can tighten fittings by hand until they stop leaking before re-attaching them to the pipe.
It would take less energy to do that, or if you feel you can’t do it yourself, you can call an experienced plumber to tighten the bolt. The leaking will halt if that was the problem that caused it in the first place.
5. Inspect For More Leaks
After tightening the bolt, you can now check if it is functioning. For instance, closely inspect joints for leaks, and tighten if necessary. The inspection will help you prevent a future reoccurrence of the problem.
6. Test For Leaks
After the inspection, if it is tight enough, you can now turn on the water supply, test for leaks, and turn it off again to avoid flooding. Once you are satisfied that your outdoor faucet isn’t leaking anymore, give yourself a small tab on the shoulder for the excellent job done!
Frequently Asked Questions
If The Leaking Outdoor Faucet Needs Replacement, How Can I Do It?
If you have ascertained that the outdoor faucet needs replacement and it’s not working, you can always consult. When consulting, you need to go to a specialized mechanical place and ask for the solutions you can partake in.
Can I Still Fix My Outdoor Faucet If I Diagnose The Leakage Cause Wrongly?
No. you can’t solve a problem without determining its cause. For instance, if the cause of your leaky outdoor faucet is due to it wearing out, and you solve the problem by spraying it, then you will not be able to fix it. Always ascertain the cause to fix it.