Brakes are, without a doubt, the essential parts of a bike. They must always be clean, in good condition, and properly adjusted before taking a ride. Over time, after riding the bike for many miles, the disc brakes may lose some of their effectiveness, leading to longer response time, little efficient braking, and little bike control. The basic brake system maintenance involves ensuring that brake components have been positioned properly and in proper working order. It’s important to give your brakes an overall check before any ride. Ensure that the brake components are properly placed and working well. The cost of bike brake repair varies in different states, as discussed below.
Average Bike Brake Repair In Different States
In California, you will be charged an average of $25 per brake labor for most brakes. If the disc brakes require repair, it will cost you $30. The service includes oiling and adjusting cables and every pivot. If your bike needs brake pads to be added, it will attract additional charges.
In Washington, the average cost of adjusting the front and rear brakes is $15. The front and rear brake pads are replaced at the cost of $20. Many bike service stores charge a service per hour, and if there is a lot of work needed to be done on the bike, you will be charged extra. The average cost of adjusting and repairing brakes in Florida is also $15. Any other service will attract additional fees.
Most states charge between $14 to $ 30 for bike brake repairs. The cost will depend on the bike repair shop. Some are expensive, while others charge reasonable amounts. Moreover, most bike repair costs come as a package where you pay a certain amount for several services, including brake repair. Therefore, it will depend on the package you choose and the type of repair the bike needs. Some service package options include safety check, standard tune-up, signature tune-up, overhaul tune-up, etc. All these packages attract different costs depending on the type of service offered.
Below Is A Table On The Average Cost Of Bike Brake Repairs In Most States.
| Installing Disc Brake Pads | $20.00-30.00 |
| Installing Brake Caliper | $20.00-40.00 |
| Installing Brake Caliper Road | $30.00-45.00 |
| Installing Hydraulic Disc Brake | $40.00-60.00 |
| Installing Mechanical Disc Brake | $30.00-40.00 |
| Adjusting Brake Front 0r Back | $15.00-25.00 |
| Bleed Hydraulic Brake | $35.00-45.00 |
| Installing Brake Cable | $20.00-35.00 |
| Installing Internal Brake Cable | $30.00-70.00 |
| Installing Internal Disc Brake Line | $40.00-60.00 |
How To Tell When Your Bike Brakes Need Repair
It’s essential to check your brakes before taking a ride. The brakes are the only thing separating the rider from a whole range of speed-related accidents. Many cyclists will squeeze the brake lever before a ride, but maintaining the brakes and repairing them is a different thing altogether. You should avoid the habit of riding until something fails because when the brakes fail, it can be disastrous.
So, how do you tell when you need to replace the brake pads? Rim brakes and disc brakes don’t have the same replacement criteria, but you should monitor wear monthly to prevent damage to the rims and guarantee maximum stopping power.
Rim Brakes
Rim brakes are decreasing in popularity, although most bikes on the road still have these brakes, which make brakes pads monitoring much easier. Many rim brake pads have a tread that determines wear. You should monitor the depth of the tread and replace it after it starts being shallow and non-existent. If there is uneven wear, you should adjust the point where the pads contact the rim or re-center the caliper to make it apply even pressure on the two sides.
Disc Brakes
Disc brakes are quite common and have numerous benefits over rim brakes, including better performance during harsh weather and the ability to feather the brakes more precisely. Disc brakes also have flaws, including being heavier than the rim brakes and wearing out faster.
The thickness of disc brake pads may vary, but generally, they can be about 4mm thick when new. New brakes cause less play in the brake lever. Over time the pads wear out, and you have to squeeze the lever more for the bike to stop. When the thickness is about 1mm, you should replace the pads.
Things To Keep In Mind When Replacing Bike Pads
The rim and disc brakes wear out at varying rates based on the conditions and task at hand. You should always check your brake pads monthly to see if they need replacement. The weather condition in your location may change how often you need to replace your pads. If you reside in wet areas, dirt and grime may stick to the bike rims and discs, which will wear through the pads faster. If this happens, you should remove the debris from the pads daily and check the pads before the next ride. You can use alcohol to clean the dirty rims.
Another thing to keep in mind is the elevation gain. Riding on the flat ground makes the brake pads last longer than if you ride in hilly areas. There is a lot of friction needed to stop a descending cycle. The weight of the ride and braking style also plays a major role in how fast the brake pads will wear out. If you weigh more, you will need more stopping power to slow down. Your brake pads will also wear out fast when you stop quickly over a short distance instead of braking gradually over a farther distance. If you are uncertain whether to repair or replace your bike brakes, it’s always good to err on the caution side. You do not want to be riding on a highway when the brakes don’t work as they should. This can be a dangerous and costly mistake.
Conclusion
Repairing a bike’s brake is important to avoid accidents on the road due to stoppage failure. Different repair shops in various states charge differently for bike brake repair services. Suppose your brakes are not functioning properly, you should consider visiting the shop near you to inquire about the repair cost.
